This is a 150hp TRITON XLS work class ROV on a wind farm installation job.
All operations were able to be performed without the need for downtime reconfiguring the ROV between tasks.
If at any time the inlet hose was needed to be removed, a simple camlock enabled removal and replacement to continue operations.
This particular proceedure took approximatly 5 minutes turnaround.
This job also did not require the use of flotation to account for the weight of the dredge.
This again shows the benefits of the compact, powerful and lightweight modular VORTEX dredge system.
Please ensure all components used are washed down with fresh water, and aluminum components sprayed with CRC, WD40, softseal or similar product prior to de-mob into shipping box.